Setting Up the Projector
12
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Projector and lens cap
Lens theft
deterrent screw
Power cord
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the projector handle. See page 79 for transportation
instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■
To receive a composite video signal from a VCR or other video
device, you'll need a video cable. One may be provided with your
video equipment.
To receive an S-video signal, you'll need an S-video cable. One
■
may be included with your video equipment, or you can purchase
one from Epson. See "Optional Accessories" on page 10.
PDF manuals and
registration CD-ROM
Remote control and
2 AA batteries
VGA computer cable
Projector software
CD-ROM
Password Protected
sticker