Connecting A Component Video Source - Epson PowerLite G5000 User Manual

Connecting a Component Video Source

You will need a special cable to connect your component video
equipment to the VGA-style connector on the projector. You can
order a component-to-VGA cable (part number ELPKC19) from
Epson; see page 10 for more information.
1. Locate a component-to-VGA cable.
2. Connect the cable to your player and the
connector on the projector.
Computer 2
Component-to-VGA cable
3. You may need to change the
projector's Signal menu to
4. To play sound, you can connect an optional stereo mini-jack
audio cable and optional external speakers (see page 21).
5. When you've finished making any connections, see page 24 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Computer 1
setting in the
Input Signal
(see page 51).
Component
or
note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player's documentation.
Also, make sure the Input
Signal setting in the Signal
menu is set to
Component Video
page 51).
Setting Up the Projector
or
Auto
(see
19