Using Projector E-Mail Alerts - Epson PowerLite G5000 User Manual

Using Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the button on the remote control, select the
Menu
menu, then press
Network
2. Choose , then press
Mail
3. Highlight to receive e-mail notifications, then press
On
4. Enter the IP address for the
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
5. Enter the SMTP server's port number. The default value is 25.
You can enter a numeric value from 1 to 65535.
6. Choose one of the
address where you want to receive a message when a problem
occurs. You can register up to three addresses. You can enter up to
32 alphanumeric characters for the e-mail address.
. You see the following screen:
Enter
.
Enter
SMTP server
fields, then enter the e-mail
Email Address
.
Enter
for the projector.
note
You can also set e-mail alerts
from EMP Monitor (see the
EMP Monitor Operation
Guide for more
information).
Managing Projectors
67