Replacing The Battery - Epson PhotoPC L-500V Reference Manual

2. Place the battery into the charger. The charge light comes on red.
If it doesn't come on, reinstall the battery in the charger.
3. When the charge light turns green, the battery is fully charged.
Remove the battery and unplug the charger from the outlet.

Replacing the Battery

If you need to replace the camera's battery, use only an Epson lithium ion battery, part number
B32B818242. Be sure to charge the new battery as described above before installing it.
1. Turn the camera on its left side.
2. Slide the battery cover until it pops up as shown:
18
Getting Started