Copying Photos To Your Computer - Epson PhotoPC L-500V Reference Manual

Copying Photos to Your Computer

You can transfer photos to your computer using the PC cable included with the camera. You can
also remove the memory card from the camera and copy photos using a card reader.
Caution:
Make sure the camera's power is turned off before you connect it to your computer.
Note:
You can conserve battery power by using the optional AC adapter while the camera is connected to your
computer. See page 25 for instructions.
If your computer uses Windows
camera. For instructions on installing the software, see the Camera Basics book.
To transfer photos using the PC cable:
1. Turn off the camera.
2. Locate the PC USB cable that came with the camera.
3. Connect the large end of the cable to any available USB port on your computer.
4. Open the connector cover on the side of the camera
and connect the small end of the cable to the camera.
5. Turn on the camera. The front light on the camera
flashes.
6. Select the EPSON_DSC drive on your computer. In
Windows, you may have to use My Computer to
select the drive.
®
98SE, you need to install driver software before you connect the
Viewing and Managing Your Photos
55