Table of Contents
Advertisement
Press 4 to choose the speed dial number mode. You see the
following display:
If you are adding a speed dial number to a list you have already
begun, enter the next available speed dial number now. You can
enter up to 30 speed dial numbers, numbered 01 through 30. The
underline is the curson The two digits before the colon are the
speed dial number. Use the # cursor key to move the cursor to the
right of the colon.
Enter the first number using
digits, but the display can
code if the speed dial number is outside your dialing area.
Note
If you make a mistake when you are entering this number
use
cursor key to
the
l
digit. Then retype the rest of the number. If you need to
erase an entire name, see Removing Numbers and Names
later in this chapter.
To register a number, including an outside line access code or an
international dialing code, enter
and then enter the number. The pause appears as a P in
PAUSE,
the display. For example, if your telephone system requires you to
dial 9 before dialing a number, you would enter the following: 9
The following appears on the LCD:
PAUSE 5551212.
#01:9P5551212
Press
The following display appears.
NEXT.
Enter the name of the person or company associated with
number, using the instructions for entering letters
keypad. You can enter up to 22
the
only the last 16. Include the area
show
cursor to the incorrect
move the
number or code, press
the
Using the PriorityFax
the
page 2-15.
on
2-21
Advertisement
Table of Contents
