Reloading Paper; Running A Copy Test - Epson PriorityFax 2000 Owner's Manual

Epson priorityfax 2000: user manual
Hide thumbs Also See for PriorityFax 2000:
Table of Contents

Advertisement

Reloading Paper

Running a Copy
Test
Insert Document
The LCD lets you know when to replace the paper roll. When
approximately 4 inches (10 cm) of paper is left, the ADD PAPER
message appears on the LCD. When you see this message, remove
the old roll and follow the instructions above to insert the new roll.
A quick test of your PriorityFax is the convenience copy function.
You can copy any document
Just follow the instructions below.
Note
The fax machine cannot read anything at
a document. Make sure to leave a margin of at least 0.15
inches (3.8mm) on the top, bottom, and sides of any
document you copy or send.
Use copies duplicated by this machine as temporary copies only. If
it is necessary to store a copy for a long time, use a copy machine
to reproduce
original document.
the
Turn the document face down with the top of the document toward
the feeder. Insert the document into
illustration below. If the document is less
adjust
document guide on the
the
paper. The paper is drawn slightly into the fax machine.
Setting Up the Priority Fax
is no more
that
than
feeder as shown in the
the
than 8.5
to match the width of the
right
8.5 inches wide.
very edge of
the
inches wide,
1-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Priority fax 2000

Table of Contents