Reloading Paper; Running A Copy Test - Epson PriorityFax 3000 Owner's Manual

Reloading Paper

Running a Copy
Test
WARNING
Always use the proper type of recording paper in this fax
machine. Epson PriorityFax paper is recommended.
The LCD lets you know when to replace the paper roll. When
approximately 4 inches (10 cm) of paper is left, the ADD PAPER
message appears on the LCD. When you see this message, remove
the old roll and follow the instructions above to insert the new roll.
A quick test of your PriorityFax is the convenience copy function.
You can copy any document that is no more than 8.5 inches wide.
Just follow the instructions below.
Note
When you send or copy a document, remember that the
fax machine cannot read text or images closer than 0.15
inches (3.8mm) to any of the four edges of the document.
Use copies duplicated by this machine as temporary copies only. If
it is necessary to store a copy for a long time, use a copy machine
to reproduce the original document.
Turn the document you wish to copy face down. Insert the
document into the feeder as shown in the illustration on the next
page. If the document is less than 8.5 inches wide, adjust the
document guide on the right to match the width of the paper. The
paper is drawn slightly into the fax machine.
Setting Up the PriorityFax
1-13