Figure 2-10 8 Ampere Power Supply 115Vac Or 230 Vac - Tb Layout - Motorola IRRInet-XL Owner's Manual

N o t e :
N o t e :
- It is recommended that a 10 Amp fuse, dedicated to the IRRInet-XL
RTU, be installed in the site's power distribution panel.
- The DC OUT On / Off switch located on the power supply front
panel, controls the 12 VDC output voltage only.
4. Return the protective plastic cover back on the power supply TB.
5. High Power Radio: Connect the radio DC power cable to the power supply
outlet RADIO (J2).
6. Low Power Radio: Connect the radio DC power cable to the power supply
outlet AUX (J3).
7. Connect the cable from the battery to the power supply inlet BATT (J1). This
cable is disconnected at the factory to remove power from the unit during
shipment.
Black (115 VAC) or Brown (230 VAC
From
White (115 VAC) or Blue (230 VAC)
Line
Power
Green or Yellow (GND)
Figure 2-10 8 Ampere Power Supply 115VAC or 230 VAC – TB Layout
OUT
)
IN
2-9