Epson Stylus NX100 Service Manual page 77

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119
4. Release the two hooks on both sides of the Carriage with a flathead precision
screwdriver or a similar tool, and remove the Holder Contact Assy upward as
shown below.
Holder Contact Assy
Figure 4-30. Removing the Printhead (4)
DISASSEMBLY/ASSEMBLY
Hook
Holder Contact Assy
Disassembling the Printer Mechanism
5. Release the hook, and remove the FFC Cover.
hook
Figure 4-31. Removing the Printhead (5)
Be careful not to touch the nozzles with bare hands or damage the
C A U T I O N
ink supply needles of the Printhead.
6. Remove the three screws that secure the Printhead, and lift the Printhead with
longnose pliers.
Head FFC
Figure 4-32. Removing the Printhead (6)
Revision C
FFC Cover
Printhead
SCREW P-TIGHT M2.6x8 BIND (4±0.25kgfcm)
Confidential
Rib
77