Setting Surface Controls - LG LRE5602SS Owner's Manual & Cooking Manual

SETTING SURFACE CONTROLS

When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Left Front)
1. Press ON/OFF pad for the desired
2. Press (
3. Use the (
4. To turn off the unit after cooking,
• Each time a pad is pressed a beep will sound.
Note:
• The power level decreases or increases by 0.5
from 9.0 through 3.0. (by 0.2 from 3.0 through
1.0)
• Lo is the lowest power level available.
To scroll through the power levels quickly press and
Note:
hold the or key pads until the power level
desired is reached.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
• NEVER leave food unattended at high or
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.
SURFACE CONTROLS COOKING
element position. The display will
flash " ".
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
) pad once to turn on the
power level "Hi" or ( ) pad once
for "Lo".
)/( ) pad to choose
the desired power setting.
( )/( ) pad is continuously
accessible. (Adjustable at any time
while the element is ON.)
press the ON/OFF pad once.
To turn on a dual surface unit (Right Front)
• Each time a pad is pressed a beep will sound.
Note:
• The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
• Lo is the lowest power level available.
To scroll through the power levels quickly press and
Note:
hold the or
desired is reached.
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
Setting
HIGH
(8.5 – Hi)
MEDIUM HIGH
(5.5 – 8.0)
MEDIUM
(3.5 – 5.0)
MEDIUM LOW
(2.2 – 3.0)
LOW/SIMMER
(Lo – 2.0)
- 10 -
1. Press the ON/OFF pad. The display
will flash " ".
(If no further pads are pressed within
10 seconds, the display will disappear.)
2. Press the ELEMENT SIZE pad as
needed to select the desired burner
size. Default size is 9". When first
selected, 12" size is ON. The light
above the ELEMENT SIZE pad
indicates which size surface unit is on.
3. Press ( ) pad once to turn on the
power level "Hi" or (
"Lo".
4. Use the ( )/( ) pad to choose the
desired power setting. (
continuously accessible. (Adjustable at
any time while the element is ON.)
5. To turn off the unit after cooking, press
the ON/OFF pad once.
key pads until the power level
CAUTION
Type of cooking
Start most foods, bring water to a
boil or pan broiling.
Continue a rapid boil, fry or deep fat
fry.
Maintain a slow boil, thicken sauces
and gravies or steam vegetables.
Keep foods cooking, poach or stew
(2.8 or lower is a simmer setting).
Keep warm, melt or simmer.
) pad once for
)/( ) pad is