D-Link des-1228/ME Hardware Installation Manual page 25

DES-1228/ME Metro Ethernet Managed Switch Hardware Installation Guide
DES-1228/ME:5#config ipif System ipaddress 10.90.90.91/255.0.0.0
Command: config ipif System ipaddress 10.90.90.91/8
Success.
DES-1228/ME:5#
In the above example, the Switch was assigned an IP address of 10.90.90.91 with a subnet mask of 255.0.0.0. (the
CIDR form was used to set the address (10.90.90.91/8). The system message Success indicates that the
command was executed successfully. The Switch can now be configured and managed via Telnet and the CLI or
via the Web-based management.
Chapter 4 – Introduction to Switch Management
Figure 4- 5. Assigning the Switch an IP Address
Page | 25