Table of Contents
Advertisement
Recording and stopping
Stopping
Recording can be stopped by one of
the following methods:
• Pressing the STOP button on the
recorder.
• Clicking the STOP button in the Toughbook-
Arbitrator Front End Software.
When recording is stopped, the post-
recording function operates to ensure
that material from a certain interval
after the stop point is included in the
recording. The duration of this interval
can be set with the Toughbook-
Arbitrator Front End Software.
Notes:
• The entire video and audio content
of the recording period, including
the prerecording and post-
recording intervals, is stored as
one file on the P2 card.
• If recording time goes beyond about
17 hours or recording file size
exceeds 4 GB, then the recorded
file will be automatically split.
Recording also stops under the
following conditions.
There is no space left on the P2
•
card.
The P2 card slots cover on the
•
Memory Card Video Recorder is
open.
Administrator setup has been
•
started.
An error is detected on the P2
•
card, and recording is no longer
possible.
The
maximum
•
recording days or files has been
exceeded while a 16 GB or higher
P2 card is inserted.
(continued)
number
of
19
Advertisement
Table of Contents
