NC1500C
2.4
Mounting the primary lens
Mount the attached lens holder (NC-PH01) before mounting the primary lens to the projector.
Remove the lens holder
[1]
mounting screws (4
pieces).
The lens holder is separated into two
parts.
Mount the lower part of the
[2]
lens holder along the lens
insertion guide.
Mount the lens holder
[3]
insertion guide (slit)
according to the lens
insertion guide notch.
Mount the upper part of the
[4]
lens holder and fix it with
mounting screws (4
screws).
Remove the front cover
[5]
(top) of the projector.
Hold the primary lens unit
[6]
with its guide notch faced
upward and insert it into
the projector until it cannot
go further.
Insert the holder into the fixing hole of
the lens ring and mount it with rotating it
clockwise.
2. Setting Up Your Projector
D-21