Table of Contents
Advertisement
NC2500S
Cleaning
1. Shut down AC power to the projection
head before cleaning.
2. Clean the cabinet periodically with a
damp cloth. If heavily soiled, use a mild
detergent. Never use strong detergents
or solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean
the lens, and be careful not to
scratch or mar the lens.
Fire and Shock
Precautions
1. Ensure that there is sufficient ventilation
and that vents are unobstructed to
prevent potentially dangerous concentrations
of ozone and the build-up of heat
inside your projector. Allow at least
8 inches (20cm) of space between your
projector and a wall. Connect the
projector exhaust outlet with the
exhaust equipment having a capacity
of 16m
/min or more.
3
2. Prevent foreign objects such as paper
clips and bits of paper from falling
into your projector. Do not attempt to
retrieve any objects that might fall into
your projector. Do not insert any metal
objects such as a wire or screwdriver
into your projector. If something should
fall into your projector, disconnect it
immediately and have the object
removed by a qualified service person.
3. Do not place any liquids on top of your
projector. Refer servicing to qualified
service personnel if liquid has been spilled.
4. Keep any items such as magnifying
glass out of the light path of the
projector. The light being projected
from the lens is extensive, therefore
any kind of abnormal objects that can
redirect light coming out of the lens,
can cause unpredictable outcome such
as fire or injury to the eyes.
5. Do not cover the lens with the
supplied lens cap or equivalent while
the projector is on. Doing so can lead
to melting of the cap and possibly
burning your hands due to the heat
emitted from the light output.
D-4
6. When using a LAN cable: For safety,
do not connect to the connector for
peripheral device wiring that might
have excessive Voltage.
CAUTION: High Pressure Lamp May
Explode if Improperly Handled. Refer
Servicing to Qualified Service Personnel.
Lamp Caution: Please
read before operation
Due to the lamp being sealed in a
pressurized environment, there is a small
risk of explosion, if not operated correctly.
There is minimal risk involved, if the unit
is in proper working order, but if damaged or
operated beyond the recommended hours,
the risk of explosion increases. Please
note that there is a warning system built
in, that displays following message when
you reach a preset operating time
"Bulb Over Time". When you see this
message please contact your dealer
for a replacement. If the lamp does
explode, smoke will be discharged from
the vents located on the back of the
unit. Do not stand in front of the
vents during the operation. This smoke
is comprised of glass in particulate form
and Xenon gas, and will not cause
harm if kept out of your eyes. If your
eyes have been exposed to this gas,
please flush your eyes out with water
immediately and seek immediate medical
attention. Do not rub your eyes! This
could cause serious injury.
WARNING:
1. Do not look into the lens while the
projector is on. Serious damage to your
eyes could result.
2. When main body is damaged, cooling
fluids may come out of internal part.
DO NOT touch and drink the cooling
fluid. When the cooling fluids are
swallowed or contacted with your eyes,
please consult with doctors immediately.
Important Information
Advertisement
Table of Contents
