Philips S99 series User Manual page 14

ENGLISH
14
Caution
- Never immerse the SmartClean system or the
charging stand in water nor rinse it under the tap.
- Never use water hotter than 80°C to rinse
the shaver.
- Do not use the shaver, SmartClean system,
adapter, charging stand or any other part if it
is damaged, as this may cause injury. Always
replace a damaged adapter, charging stand or part
with one of the original type.
- Only use the SmartClean system with the original
SmartClean cleaning cartridge.
- Always place the SmartClean system on a stable,
level and horizontal surface to prevent leakage.
- When the SmartClean system is ready for use,
do not move it to prevent leakage of cleaning fluid.
- Always make sure that the cartridge compartment
is closed before you use the SmartClean system
to clean or charge the shaver.
- The SmartClean system thoroughly cleans but
does not disinfect your shaver, therefore do not
share the shaver with others.
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
Compliance with standards
- This shaver is waterproof and complies with the
internationally approved safety regulations. It is
suitable for use in the bath or shower and for
cleaning under the tap. For safety reasons,
the shaver can therefore only be used cordlessly.