Safety Precaution; Introduction - D-Link DSL-2750U User Manual

Section 1 – Product Overview
Follow the following instructions to prevent the device from risks and damage
 Use the power adapter in the package.
 An overburden power outlet or damaged lines and plugs may cause electric shock or fire accident. Check the power cords regularly. If you
find any damage, replace it at once.
 Proper space left for heat dissipation is necessary to avoid overheating. The holes on the device are designed for heat dissipation to ensure
running normally. Do not cover these heat dissipation holes.
 Do not put this device close to a heat source or high temperature place. Avoid the device direct exposing sunshine.
 Do not put this device close to over damp place. Do not spill any fluid on this device.
 Do not connect this device to PC or electronic product, unless our customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.
 Do not place this device on an unstable surface or support.
The DSL-2750U supports multiple line modes. With four 10/100 base-T Ethernet interfaces at the user end, the DSL-2750U provides both DSL uplink
access with a downstream rate of 24 Mbps and an upstream rate of 1 Mbps and Ethernet uplink access. It also supports 3G connection to the Internet
or Intranet for high-end users like net bars and office users. It complies with specifications of IEEE 802.11, 802.11b/g/n, WEP, WPA, and WPA2
security. The WLAN of the device supports 2T2R.
D-Link DSL-2750U User Manual

Safety Precaution

Introduction

1