Table of Contents
Advertisement
4.
Remove the four Phillips PM2.5×6.5 screws (1) (two from each hinge) and one broadhead Phillips
PM2.0×2.0 screw (2) (on the left hinge) that secures the display assembly to the computer.
5.
Separate the display from the computer (3).
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display bezel:
a.
Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the
display bezel until the bezel disengages from the display enclosure.
b.
Remove the display bezel (4).
Component replacement procedures
79
Hide quick links:
Advertisement
Table of Contents
