4 Perform one of the following actions:
•
Press and hold the preprogrammed Volume
Set button to hear the volume set tone. Adjust
the Volume Control Knob if necessary.
Release the Volume Set button.
•
At the desired Fireground zone and channel,
press the preprogrammed Monitor button and
listen for activity. Adjust the Volume Control
Knob if necessary.
•
If your radio is working in Fireground Zone
Channel, proceed to next step.
5 Press and hold the PTT button to transmit. The
LED lights up solid red while transmitting. Talk into
the microphone clearly if needed.
6 Release the PTT button to receive.
You hear a Transmit End Tone.
Responding to Evacuation Indicator
The Incident Commander can trigger one of sixteen
Tactical Alerts from the Command Terminal. These
alerts can target individuals or groups of users within
the Fireground Communication System. The
ergonomic (visual and audible) response for the
Tactical Alerts can be customized.
Your radio sounds the audible response at the profile
maximum alert tone volume level. The display shows
the configurable programmed alert text and intelligent
lighting.
Perform one of the following actions:
•
Move the Volume Control Knob to adjust the
volume of the audible alert from full volume.
•
Pressing the PTT button shall cancel the
indications and send an acknowledgment to
the command terminal.
Tactical Public Safety (TPS) (Conventional
Only)
TPS enables the user of a group to identify the start
and the end of a transmission by displaying the caller
name or ID on the radio display.
Using TPS Normal Transmission
At TPS Zone Channel, perform one of the
following actions:
55
English