Radio Indications Of Lost Bluetooth Connection; Standard Pairing Feature - Motorola APX 6000 User Manual

<Device Type> UNPAIRED. Repeat this step
to re-initiate the pairing process.
If the connection is successful, you hear an
incremental-pitched tone. The display shows <Device
Type> CONNCTED and the Bluetooth icon turns from
to .
If the radio has the pairing record of the device and
the connection fails, you hear a short, low-pitched
tone. The display shows <Device Type> CON FAIL.

Radio Indications of Lost Bluetooth Connection

The radio shows
connection. Below are the radio indications when the
connection is interrupted.
The starts blinking for up to 10 seconds. You hear
a decremental-pitched tone. The display shows
<Device Type> alternating with CON LOST.
If the Bluetooth device successfully re-connects
before the Bluetooth Drop Timer expires, the display
shows momentary <Device Type> CONNCTED, and
shows persistently, or if the Bluetooth device fails
74
English
when the device has a Bluetooth
to re-connect within 10 seconds, the blinking
replaced by a persistent

Standard Pairing Feature

Note:
Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be
preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
time power consumption and not the Standby
time consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable devices. Once the device is
discovered, your radio automatically pairs with the
device.
This feature also enables your Bluetooth enabled
radio to be visible to other Bluetooth enabled devices
and receive request to pair from other devices.
is
.