Safety; Safe Operating Practices - Toro 30363N Operator's Manual

Safety

This Machine meets or exceeds ANSI B71.4–2004
specifications in effect at the time of production
Improper use or maintenance by the operator or
owner can result in injury. To reduce the potential
for injury, comply with these safety instructions and
always pay attention to the safety alert symbol, which
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with the instruction may
result in personal injury or death.

Safe Operating Practices

The following instructions are from the CEN standard
EN 836:1997 and ANSI B71.4-2004.
This product is capable of amputating hands and
feet and throwing objects. Always follow all safety
instructions to avoid serious injury or death.
Training
• Read the Operator's Manual and other training material
carefully. Be familiar with the controls, safety signs,
and the proper use of the equipment.
• Never allow children or people unfamiliar with
these instructions to use the lawn mower. Local
regulations can restrict the age of the operator.
• Never mow while people, especially children, or pets
are nearby.
• Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
• Do not carry passengers.
• All drivers should seek and obtain professional
and practical instruction. Such instruction should
emphasize:
– the need for care and concentration when
working with ride-on machines;
– control of a ride-on machine sliding on a slope
will not be regained by the application of the
control levers. The main reasons for loss of
control are:
◊ insufficient wheel grip, especially on wet
grass;
◊ being driven too fast;
◊ inadequate braking;
◊ the type of machine is unsuitable for its task;
◊ lack of awareness of the effect of ground
conditions, especially slopes;
◊ incorrect load distribution.
Preparation
• While mowing, always wear substantial footwear and
long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
• Thoroughly inspect the area where the equipment
is to be used and remove all objects which may be
thrown by the machine.
• Warning—fuel is highly flammable.
– Store fuel in containers specifically designed for
this purpose.
– Refuel outdoors only and do not smoke while
refueling.
– Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel while
the engine is running or when the engine is hot.
– If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source of
ignition until fuel vapors have dissipated.
– Replace all fuel tank and container caps securely.
• Replace faulty silencers/mufflers.
• Before using, always visually inspect to see that the
blades, blade bolts and cutter assembly are not worn
or damaged. Replace worn or damaged blades and
bolts in sets to preserve balance.
Operation
• Be alert, slow down and use caution when making
turns. Look behind and to the side before changing
directions.
• Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
• Mow only in daylight or in good artificial light.
• Before attempting to start the engine, disengage all
blade attachment clutches and shift into neutral.
• Remember there is no such thing as a safe slope.
Travel on grass slopes requires particular care. To
guard against overturning:
– do not stop or start suddenly when on a slope;
– use slow speeds on slopes and during tight turns;
– stay alert for humps and hollows and other
hidden hazards;
• Watch out for traffic when crossing or near roadways.
• Stop the blades from rotating before crossing
surfaces other than grass.
4