How To Change The Value Of Value Pointer Parameters - ABB ACSM1 Control Panel User Manual

Step Action
6. • To save the new value, press
• To cancel the new value and keep the original, press

How to change the value of value pointer parameters

In addition to the parameters shown above, there are two kinds of pointer
parameters; value pointer parameters and bit pointer parameters. The value pointer
parameter points to the value of another parameter/signal. The source parameter is
given in format P.xx.yy, where xx = Parameter group; yy = parameter index.
For more information, see appropriate Firmware Manual.
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Parameters option by selecting PARAMETERS on the menu with
keys and
3. Select the appropriate parameter group with keys
value pointer parameter 15.01 AO1 PTR is used as an example.
SEL
4. Press to select the appropriate parameter group. Select the appropriate
parameter with keys
shown below it.
EDIT
5. Press . Current value of the value pointer parameter is shown, as well as
the parameter group it points to.
6. Specify a new parameter group for the value pointer parameter to point to with
keys and
SAVE
.
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing .
and , current value of each parameter is
. The parameter group changes respectively.
CANCEL
.
and . Here the
Display
LOC PARAMETERS
9901 LANGUAGE
9904 MOTOR TYPE
PMSM
9906 MOT NOM CURRENT
9907 MOT NOM VOLTAGE
EXIT 00:00 EDIT
Display
LOC
MAIN MENU
PARAMETERS
FAULT LOGGER
TIME & DATE
EXIT 00:00 ENTER
LOC PAR GROUPS
01 ACTUAL VALUES
02 I/O VALUES
03 CONTROL VALUES
04 POS CTRL VALUES
06 DRIVE STATUS
EXIT 00:00 SEL
LOC PAR GROUPS
10 START/STOP
11 START/STOP MODE
12 DIGITAL IO
13 ANALOGUE INPUTS
15 ANALOGUE OUTPUTS
EXIT 00:00 SEL
LOC PARAMETERS
1501 AO1 PTR
P.01.05
1502 AO1 FILT TIME
1503 AO1 MAX
1504 AO1 MIN
EXIT 00:00 EDIT
LOC PAR EDIT
1501 AO1 PTR
P.01.05
01 ACTUAL VALUES
CANCEL 00:00 NEXT
LOC PAR EDIT
1501 Ao1 PTR
P.02.05
02 I/O VALUES
CANCEL 00:00 NEXT
Operation
25
1
01
15