Adjusting Color Balance (Cmyk Adjustment) (Color Model Only); Canceling Color Balance Adjustment - Toshiba e-STUDIO 2000AC Copying Manual

Adjusting Color Balance (CMYK adjustment) (Color Model only)

0.
This function allows you to adjust the overall color balance of the copied image by changing the strength of Yellow (Y),
Magenta (M), Cyan (C) and Black (K). This function is available in the full color mode or the auto color mode.
Press [Color Balance] in the Image menu.
1
Press or
2
After completing the color balance adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [Detail] and go to the next step.
3 Press or
For example, when you adjust the high density area of magenta (M) to the
density area becomes darker.
After completing the adjustment, press [OK].
 Canceling color balance adjustment
 Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].
 If you want to cancel the adjustment of all colors, press [Reset], and then [OK].
Yellow ( Y )
of each color to obtain the desired color balance.
of the color on each density area to obtain the desired color balance.

Adjusting Color Balance (CMYK adjustment) (Color Model only) 107

Magenta ( M ) Cyan ( C ) Black ( K )
side, the magenta in its high