Selecting Exit Tray; Changing The Exit Tray - Toshiba e-STUDIO 2000AC Copying Manual

Selecting Exit Tray

0.
You can select the exit tray if the finisher or the Job Separator is installed.
 The available exit tray may be restricted depending on copy modes and paper sizes.
 Exit tray selection is set at automatic selection by default.
 Changing the exit tray
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray, press
[Exit Tray]. Every time you press this, the display changes from the exit tray of the equipment, each exit tray of the
finisher and Job Separator, and automatic selection in this order.

40 Selecting Exit Tray

Exit tray auto-selection
indication
Current exit tray
[ Exit Tray ] button