Staple Sort Mode - Toshiba e-STUDIO 2000AC Copying Manual

2.HOW TO MAKE COPIES
 Staple sort mode
When you make more than one set of copies, the copied paper can be automatically stapled set by set. This mode is
called the staple sort mode. You can choose from 4 different stapling positions. When the staple sort mode is selected,
copies automatically exit in the offset mode (shift exiting).
Example: When [Upper Left] for the staple is selected
 Special paper such as OHP film or sticker labels is not applicable.
 Copies in different sizes cannot be stapled unless their length is the same.
 An error occurs if the stapling position is not appropriate for the selected paper size.
 Even when the staple sort mode is selected, the offset mode (shift exiting) does not work depending on exit trays
and paper size. For each corresponding condition, refer to the Specifications Guide.
When the number of sheets exceeds the maximum number of sheets available for stapling, this equipment
automatically enters into the sort mode.
Press [Finishing] on the Basic menu.
1
Press the button for the staple position, select the direction that matches the original you set
2
from "Original Direction", and press [OK].
Set the staple position based on the button icons and original direction icons.
"Original Direction" can be set on the Copy menu.
 P.13 "Equipment status indication area"
Selecting Finishing Mode 57