Rear Port Cover - HP ProOne 400 Maintenance And Service Manual

Rear port cover

1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. If the security lock screw is secured, unscrew it with a T15 tamper-resistant Torx security screwdriver.
4. Slide the rear port cover retainer tabs toward each other (1) to release the port cover.
5. Pull the port cover (2) toward the bottom and off the computer.
Preparing to disassemble the computer on page
Attaching and removing a stand on page 20).
Rear port cover
19).
23