Top Trim - HP ProOne 400 Maintenance And Service Manual

Top trim

The top trim is located along the top of the computer.
To remove the top trim:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the five Torx screws that secure the trim to the computer.
6. Rotate the bottom of the trim up and off the computer.
To install the top trim, reverse the removal procedures.
48 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
23).
20).
24).
19).