Airprotocol - Siemens SIMATIC RF310M Function Manual

RFID Reader Interface Reference
3.4 IRfReaderApi
ReaderHWVersion
ReaderLoaderVersion
ErrorCounter
AbortCounter
CodeErrorCounter
SignaturErrorCounter
CRCErrorCounter
Version information
Supported in RFID Reader Interface:since V1.0
3.4.5

AirProtocol

AirProtocol : string {get, set}
Property
A string identifying the current or desired air protocol
Exceptions
RfReaderApiException
Note
Sets a new air protocol type or returns the air protocol type currently in use.
Valid protocol types are:
● EPCC1G2
● ISO18000-6B
● RF300
● ISO15693
Remember that not all functions are supported for all protocol types and that there may be
restrictions on the data ranges.
KillTag and LockEPCGen2Tag are only supported for the EPCC1G2 protocol. Invoking these
functions while another protocol e.g. ISO18000-6B is set will result in an exception.
Version information
Supported in RFID Reader Interface: since V1.0
46
The hardware version of the RFID modul (RF310M only)
The version of the RFID modul (RF310M only)
The error counter of the RFID modul (RF310M only)
The abort counter of the RFID modul (RF310M only)
The code error counter of the RFID modul (RF310M only)
The signatur error counter of the RFID modul (RF310M only)
The CRC error counter of the RFID modul (RF310M only)
Error while communicating with the reader service. Check the Error
member for more information.
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
Mobile Readers