Table of Contents
Advertisement
Installation and Setup
Installing a PS4000 Array
Figure 2-2 shows the front view of a PS4000 array, which is a 3U array with 16
drive slots, two power supply and cooling modules, and two control modules of
the same type; either two Type 8 or two Type 9 control modules.
Figure 2-3 shows the rear view, with two Type 8 control modules.
Figure 2-2: PS4000 Array - Front View (without Bezel)
Before You Begin
You must meet these prerequisites before installing a PS4000 array:
•
Make sure the array and installation location meet the environmental
requirements. See Environmental Requirements on page 2-5.
•
Gather all the required hardware. See Shipping Box Contents and Required
Hardware on page 2-6.
•
Rack mount the array. See Rack Mount Requirements on page 2-7.
2–4
Figure 2-3: PS4000 Array - Rear View
Installing a PS4000 Array
Advertisement
Table of Contents
