Table of Contents
Advertisement
Installation and Setup
Prompt
Description
Password for the
Password that will override the factory-set group administration
password (
grpadmin
account
must have 3 to 16 letters or numbers and is case-sensitive.
Required only when creating a new group.
Microsoft service
CHAP user name and password used to enable Microsoft service
user name and
(VSS or VDS) access to the group. The user name must have 3 to 63
password
alphanumeric characters. The password must have 12 to 16
(optional)
alphanumeric characters, and is case-sensitive.
Microsoft services running on a computer must be allowed access to
the group in order to create VSS snapshots in the group or use VDS.
Applicable only when creating a group with the Remote Setup
Wizard.
Step 3: Start the Software Configuration
Use the
utility or the Remote Setup Wizard to initialize the array and either
setup
create a group with the array as the first group member or add the array to an
existing group.
After you complete the software configuration, the array becomes a member of a
group and its disk storage is available for use.
Using the setup Utility to Configure the Software
To use the
utility to initialize an array and create or expand a group:
setup
1. On the console or terminal emulator that has the serial connection to the array,
press the
Note: If the array does not respond, contact your PS Series support provider
for information on how to proceed.
2. At the login prompt, enter
the password. Passwords do not appear on the screen.
3. When prompted, enter
Table 3-2: Group Configuration
grpadmin
key.
grpadmin
to start the
y
) for the
account. The password
grpadmin
for both the account (login) name and
utility.
setup
Software Configuration
3–3
Advertisement
Table of Contents
