Lenovo ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet User Manual page 34

Note: Make sure the top of the enclosure is facing right.
① Have the person on the front side support the weight, while the other person on the rear side
align the enclosure to the slide rails. Position the enclosure as shown, and slide it into the rack.
② Press the release latches.
③ Push the enclosure all the way into the rack until it clicks into locked position.
Step 10. (Optional) Open the rack release latches and tighten the screws to firmly secure the rail before
moving or placing the rack cabinet in a vibration-prone area.
Figure 25. Securing the enclosure
1 Rack release latches
Remove SE350 E1 enclosure from the rack
24
ThinkSystem Micro DataCenter 6U 1200mm Deep Rack Cabinet User Guide
2 Front screw