Table of Contents
Advertisement
Power Mode Selector
Pressing power mode selector switch (14) alternately
activates (ON) and deactivates (OFF) the power mode.
When the power mode is activated (ON), the indicator " "
appears on the monitor display.
The power mode is suited for heavy digging work
prioritizing work effectiveness. Under auto shifting
mode, the gear is shifted in regular RPM's (min
mapping.
f
NOTE: When the power mode is OFF, the machine operates
prioritizing fuel consumption. Under auto shifting mode, the
gear is shifted in early timing.
Shift Change Delay Mode
When travel mode selector (13) is set in AUTO 1 or AUTO 2,
the shift up timing in 2nd range 3rd range is delayed.
Loading work can be easily done in 2nd range position.
Shift Up Delay
Forward
:
The gear shifts up when moving the
movement
machine at high speed in 2nd range for 8
seconds or longer. The gear will not shift
while the lift arm is raising. The forward
shift up delay will operate only one time
when the bucket is in the operating
position. When the bucket is lower at
digging position, the shift delay always
operates.
Reverse
:
The gear shifts up when operating the
movement
machine at high speed in 2nd range for
8 seconds or longer. The shift up delay
always operates.
f
NOTE:
This does not apply when the lockup clutch is used; shift up
timing from 2nd range to 2nd lock-up, or from 2nd lock-up
to 3rd range is not delayed.
Capability to activate or not activate the shift change
delay mode is selected via the transmission setting menu
on the monitor. Refer to page 1-59 for details.
MOVING THE MACHINE
) and shift
-1
4-6
14
MNEC-01-016
13
OFF
MNEC-01-024
Advertisement
Table of Contents
Troubleshooting
