Rops (Roll Over Protective Structure - Hitachi ZW 550-6 Operator's Manual

ROPS (Roll Over Protective Structure)

The Roll Over Protective Structure (ROPS) is attached to
protect the cab in case of a machine rollover.
d
WARNING: Operating with damaged or improperly
mounted ROPS could serious injury or death. Be sure
to observe the following:
- Whenever seated, fasten the seat belt.
- Do not modify ROPS, such as drilling or welding.
- Do not use ROPS deformed.
- If any damage or loose bolts (1) are found, do not
operate until repaired.
- Never repair or modify ROPS without manufacturer's
approval and instructions.
Be sure the ROPS is:
-in place.
-properly attached (no bolts loose or missing).
-not damaged.
-not modified.
Periodically check the ROPS bolts (1) to be sure they are in
place and tight.
SAFETY
S-40
ROPS
1
CAB
115Z7-ROPS