E-Mail; Configuring The Instrument - ABB SM1000 User Manual

Videographic Recorders
SM1000 and SM2000

3.5 E-Mail

The instrument can be configured to send e-mails to a
maximum of 6 recipients in response to certain events. The
addressees can all subscribe to the same SMTP server or the
instrument can be configured to send e-mails via 2 different
SMTP servers to a maximum of 3 addressees per server.
Up to 10 independently configurable triggers may be enabled to
generate an e-mail when the selected source becomes active.
When a trigger source becomes active, an internal 1 minute
delay timer is started. At the end of that minute, an e-mail is
generated that includes, not only the event that initiated the
delay timer, but every other event that occurred during the delay
period together with any enabled reports. The data returned in
the e-mail therefore reflects the real-time alarm state at the time
the e-mail was generated, not the state when the first trigger
source became active.
Each e-mail includes a link to the instrument's embedded web
server enabling the instrument's data and status to be viewed
remotely using an internet browser on a PC – see Section 5,
page 17.

3.5.1 Configuring the Instrument

Enter the IP address of the SMTP server through which e-mails
are to be routed.
Enter the address(es) of the e-mail recipient(s).
Select the options to enable.
10
Channels Report
When selected, a summary of all enabled channels together
with their instantaneous values is included in the e-mail.
Totalizers Report
When selected, a summary of all enabled totalizers together
with their instantaneous values is included in the e-mail.
External Media Report
When selected, a summary of the condition of the external
media (if any) and archiving status is included in the e-mail.
Fig. 3.6 is an example of a reports e-mail.
Note.
Reports, when enabled, are included only on an
e-mail generated as a result of a real time alarm event
unless the 'Reports in ALL emails' box is ticked, in
which case enabled reports are included on every
e-mail generated.
Triggers 6 to 10, if enabled (see below), may be
'inverted', i.e. an e-mail is generated when the trigger
source becomes inactive instead of active. Event
trigger source types that cannot be inverted are:
Alarm acknowledge, Any alarm and New alarm.
Select up to 10 event source types to generate an e-mail.
Fig. 3.7 is an example of an event triggered e-mail.
3 Configuration
IM/SMENET Issue 4