ABB SM1000 User Manual page 20

Videographic Recorders
SM1000 and SM2000
Channel tags
Auto refresh. If
enabled, the
values are
updated
automatically
every 10 seconds
Enabled recording
channels (the
color coding is the
same as the
standard trace
colors used on
the instrument)
Fig. 5.2 Recording Channels Page
Note. Alarm acknowledgement is enabled only if a user has been configured for remote operation access – see Section 3.1,
page 5.
Alarm tag
Alarm type
Configured
alarms,
color coded
for each
channel
Fig. 5.3 Alarms Page
18
Latest value of channel
and units of measure
Alarm status of each channel – refer to Section 6 of relevant User
Guide (IM/SM1000 or IM/SM2000) for identification of alarm icons
Primary and secondary sample
rates set in Configuration
Current status of
recording
Alarm
acknowledgement
status
Click to
acknowledge
alarm (a warning
message is
displayed if not
logged on) – see
Note
Current alarm
status
Alarm trip value
and units of
measure
IM/SMENET Issue 4
5 Operation
below