Port; Flags - Philips dynalite DDRC-GRMS-E Commissioning Manual

Signify Classified - Internal
DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 18
.......................................

Port

Property
Port type
Mode
IP Address
Port
Protocol

Flags

Property
Connection
Area Zero Transmit
Sign on at start up
March 5, 2019
Description
Port type can be set to DyNet1, DyNet 2, or Text & Binary
Integration.
Defines if the controller is acting as the client or server.
The IPv4 or IPv6 address of the Ethernet port
Port number
TCP or UDP
Description
Specifies a Trunk or a Spur connection for address translation
purposes.
Sending of all-areas messages may be enabled or disabled.
Sending a sign on message at startup may be enabled or
disabled.
www.lighting.philips.com/dynalite