Table of Contents
Advertisement
Product Overview
1. Controls
Specifications
Width
Length
Height
Weight
Maximum hopper capacity
Spreading width
Figure 12
2. Hopper
69 cm (27 inches)
81 cm (32 inches)
71 cm (28 inches)
32 kg (70 lb)
36 kg (80 lb)
1.2 to 6.7 m (4 to 22 ft)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Important:
The intended use of this spreader
attachment is for dispersing grass seed. This is
not to be used for fertilizer or any other chemical
applications.
Controls
Impeller Speed Control
The impeller speed control is located at the top of the
spreader accessory control panel
g228584
Push down on the right side of the switch 1 time to
turn the spreader on; continue to tap the right side to
increase the impeller speed.
Tap the left side of the control to decrease the speed;
push and hold the left side of the switch to turn it off.
Note:
The impeller speed control can be turned off
at any speed rate. It is not necessary to decrease the
speed until it turns off. The last set speed displays
when you turn on the control.
1. Impeller speed control
2. Impeller speed display
Impeller Speed Display
Located below the impeller speed control.
This display shows the speed setting number from 1
to 10 (1 is the slowest speed and 10 is the fastest). A
circle displays when the control has been turned off.
12
(Figure
13).
Figure 13
3. Distribution limit lock knob
4. Flow control lever
g207672
Advertisement
Table of Contents
