50in, 54in, or 60in Recycler
Zero-Turn-Radius Riding Mowers
Model No. 139-3235
Model No. 139-3240
Model No. 139-3290
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
3
4
5
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the PTO, engage the parking brake,
and move the motion-control levers outward to
the N
-L
EUTRAL
OCK
3.
Shut off the engine and remove the key.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Description
No parts required
Right baffle
Bolt (5/16 x 3/4 inch)
Nut (5/16 inch)
Left baffle
Bolt (5/16 x 3/4 inch)
Nut (5/16 inch)
Decal
Mulching blade
position.
Register at www.Toro.com.
®
Kit
Qty.
–
Prepare the machine.
1
1
Install the right baffle.
4
1
1
Install the left baffle.
3
1
Install the decal and mulching blades.
3
2
Preparing the Mower Deck
No Parts Required
Procedure
1.
Remove the mower deck from the machine;
refer to the Operator's Manual for the machine.
2.
Turn the mower deck upside-down.
3.
Remove the existing mower blades; refer to the
Operator's Manual for the machine.
4.
Remove the nut securing the cutoff baffle to the
deck and remove the cutoff baffle
Note:
Retain the baffle for converting back to
side discharge.
Original Instructions (EN)
All Rights Reserved *3438-195* A
Printed in the USA
Form No. 3438-195 Rev A
Installation Instructions
Use
(Figure
1).