Xvid Assignment And Xser Assignment; Xvid And Xser Markings; Connector Panel Of The Profibus Interface - Bosch Rexroth IndraControl VDP 92.3 Project Planning Manual

Project Planning Manual | Rexroth IndraControl VDP 92.3

XVID Assignment and XSER Assignment

XVID and XSER Markings

6.2

Connector Panel of the Profibus Interface

The display identification of a VDP 92.3 is only active once after
switching on the VPB40.3. That means that if a VDP 92.3 is plugged
and then removed or a VDP 92.3 is connected when starting the
control cabinet PC, only a VDP 92.3 with the same resolution can
be connected again. Thus, it is ensured that the screen output on
the connected VDP 92.3 is executed automatically without switch‐
ing the screen output to the VDP using the keyboard.
All connections of the XVID and XSER interface are assigned.
Fig.6-8: RJ45 female connector for the XVID and XSER interfaces
For information on the cable lengths related to the display resolution, please
refer to chapter 11.2 "Accessories" on page
The CDI interfaces are color-coded on the device:
CDI interface, data (XSER)
CDI interface, screen (XVID)
Fig.6-9: Colored marking on the CDI interfaces
Fig.6-10: Connector panel of the Profibus interface
Electric Drives | Bosch Rexroth AG
and Controls
47.
Violet
Black
27/52
Interfaces