Camera Translation; Set Language - Philips VoiceTracer VTR5080 User Manual

4.Click to copy the translation outcome.
5.Click "Language" to switch source language and target
language, as shown below:

6.3 Camera translation

In the case of the translator is connected, click the Camera
button in the App main interface or click the Camera
button on the translator to conduct camera translation.
1.Click to shoot (or click the Camera button on the
translator to shoot).
2.After shooting, the user shall paint the area that need to be
recognized to conduct recognition. It will translate after
successful recognition and the translation outcome will be
displayed after successfully translated.
3.Click Full screen translation
translation.
4.Click "Language" to switch the language of source language
and target language (support 10 languages). As shown
below:
to conduct full screen
5.Clickto broadcast the translation outcome in voice.
Note
• Please try to make sure that the picture is clear enough,
blurry picture may affect the picture recognition and
translation outcome.

6.4 Set language

You can set the language of speech language and camera
language and collected language in Settings – Set Language.
6.5 Speech Translation
1.Click source language to set the source language of speech
translation.
2.Click target language to set the target language of speech
translation.
EN 35