Table of Contents
Advertisement
REAR-PANEL CONNECTIONS
ANALOG
R
L
OUT
CDP
OUT
CDR
IN
1
3
2
4
1
Play (CDP)-Deck Analog Output
2
Record (CDR)-Deck Analog Output
3
Record (CDR)-Deck Analog Input
1
Play (CDP)-Deck Analog Output : These
jacks carry the analog audio output signal from
the Play Deck. Connect them to the CD input
jacks on a receiver, preamp or processor.
2
Record (CDR)-Deck Analog Output :
These jacks carry the output signal from the
Record Deck. Connect them to the Tape
Play/In input jacks on a receiver, preamp or
processor.
3
Record (CDR)-Deck Analog Input :
These jacks accept the analog signals that are
used for CD recordings. Connect them to the
Tape Rec/Play outputs on a receiver, preamp
or processor.
4
Play(CDP)-Deck Coaxial-Digital Output :
This jack carries the digital-audio output signal
from the Play Deck. Also, if it is the single
mode, it will output from the Record Deck.
Connect it to a coaxial-digital input on a
receiver, processor or digital decoder.
COAXIAL
OUT
OUT
CDR
IN
IN
OUT
5
7
8
6
Play (CDR)-Deck Coaxial-Digital Output
4
5
Record (CDR)-Deck Coaxial-Digital Output
6
Record (CDR)-Deck Coaxial-Digital Input
5
Record(CDR)-Deck Coaxial-Digital
Output : This jack carries the digital audio
output signal from the Record Deck. Connect
it to a coaxial digital input on a receiver,
processor or digital decoder. Also, if it is the
single mode, it will output from the Play Deck.
6
Record (CDR)-Deck Coaxial-Digital
Input : This jack accepts the digital-audio input
signal from a compatible digital audio product
and should be connected directly to a digital
player or to a coaxial-digital output on a CD or
DVD player or an A/V receiver or processor.
IMPORTANT NOTE : The coaxial digital inputs
should only be connected to digital input or
output jacks. Even though they use the same
RCA type connector as standard analog audio
connections, DO NOT connect them to
conventional analog input or output jacks.
7
Record (CDR)-Deck Optical-Digital
Input : This jack accepts the digital-audio input
signal from a compatible digital audio product,
and should be connected directly to the optical-
digital output on a CD or DVD player or an A/V
receiver or processor.
- 10 -
9
Record (CDR)-Deck Optical-Digital Input
7
8
Record (CDR)-Deck Optical-Digital Output
9
AC Power Cord
8
Record (CDR)-Deck Optical-Digital
Output : This jack carries the digital audio
output signal from the Record Deck. Connect
it to an optical digital input on a receiver,
processor or digital decoder. If it is the single
mode, it will output also from the Play Deck.
9
AC Power Cord : Connect this plug to an
AC outlet. If the outlet is switch controlled,
make certain that it is in the ON position
Advertisement
Table of Contents
