LG ADR-620 Owner's Manual page 12

REMOTE CONTROL FUNCTIONS
Display Control : Press this button to
1
cycle through the various time display
options for the disc in the Play Deck and
Record Deck.
Numeric Keys : Press these buttons to
2
access a specific track for playback or
during the programming process.
3 Reverse Search : Press this button to
play the selected disc in reverse to locate
a desired passage.
4 Dual Playback : Press this button to
enable both CD Decks to play back at the
same time and function as separate,
independent CD units. In this mode it is
also possible to record from an external
source while the Play Deck is functioning
as a standard CD player.
5 Play / Select : This button has two
functions. It will most often be used as a
standard play button, but when setting up
certain record functions, it is also used as
an Enter or Select button.
6 Previous-Track Skip : Press this button
to skip backwards to the beginning of the
track currently being played. Press it a
second time to move back to the
beginning of each previous track.
Pause : Press this button to momentarily
7
pause playback. Press it again to resume
playback.
Program : Press this button to begin the
8
programming sequence for one of the
CD decks.
Play (CDP)-Deck Select : Press this
9
button to control or program the functions
of the disc in the Play Deck.
10
Program Check : Press this button to
check or edit a programmed playback
sequence.
Repeat : Press this button once to repeat
11
the current track. To repeat an entire disc,
press the button twice, and then press
the Play / Select button.
Clear : Press this button to clear an item
12
in a program sequence.
Record Button : Press this button to
13
begin a manual recording.
Dubbing : Press this button to begin a
14
dub.
Input Select : Press this button to select
15
the input source (analog, digital-coaxial or
digital optical) for recording.
16 Play (CDP)-Deck Open : Press this
button to open the Play Deck.
17 Record (CDR)-Deck Open : Press this
button to open the Record Deck.
Automatic / Manual Track Increment
18
Selector : Press this button to select
between automatic and manual track
increments during a recording session.
19 Track Increment : When the Manual
mode for track increment is selected
during recording, press this button to
increase the track number. NOTE : This
function does not operate during CD
Sync or dub recording.
20 CD Sync : Press this button once to
begin an automated recording of a single
track from an external CD player when a
digital connection is used. Press it twice
to begin automated recording of an entire
disc.
21 Speed Select : Press this button to
select the recording speed for internal
dubs.
- 12 -
Erase Button : Press this button to
22
initiate the erasure of a track or of an
entire CD-RW disc or to Unfinalize a disc.
Note that erasure is only possible on CD-
RW discs.
Finalize : Press this button when a
23
recording is complete to initiate the
finalization process. The Play / Select
button on the Record deck or remote
control must be pressed within three
seconds to activate finalization. Until this
button is pressed and the finalization
process is complete, CD-R discs may not
be played on conventional CD machines.
24 A-B Repeat : Press this button to specify
a segment of a disc for repeat play.
Record (CDR)-Deck Select : Press this
25
button to control or program the functions
of the disc in the Record Deck.
Stop : Press this button to stop playback
26
or recording.
Next Track : Press this button to skip
27
forward to the next track on a disc.
Random Play : When the CD Deck is
28
stopped, press this button to begin
random play of all tracks on a disc.
Forward Search : Press this button to
29
play a disc in a fast-forward mode.