Table of Contents
Advertisement
PLAYBACK BASICS
PREV.(
)
DUAL
NEXT(
DUAL
DISPLAY
PREV.
NEXT
OPEN/CLOSE
PLAY
PAUSE
STOP
POWER
PHONES
PHONE LEVEL
DIGITAL IN
PLAY(
)
STOP(
Searching for a Particular Point in a Track
You may quickly scan through the contents
of a disc while listening to the playback at
high speed in forward or reverse.
To move forward through a disc,
press the SEARCH[
] button on the remote
or press and hold the NEXT[
] button on the
front panel that is appropriate for the deck in use.
To move backwards through a disc,
press the SEARCH[
] button on the
remote, or press and hold the PREV.[
button on the front panel that is appropriate
for the deck in use. When using the remote,
always remember to make certain that you
have selected the deck you wish to control
by pressing the appropriate selector[CDP or
CDR] button before entering the desired
remote command.
Skipping to the Beginning of a Track
To move from one track on a disc
directly to another,
enter the number for the desired track with
the Numeric Keys. The disc will pause
briefly to locate the track, and then
immediately play it. When entering a two
digit track number, the second digit must be
entered within two seconds of the first digit.
To move to the next track on a disc by
cycling through the individual tracks,
press the NEXT[
] button on the remote,
or the appropriate front-panel NEXT[
button for the deck in use. Additional
presses of the button will move forward
through the tracks on the disc.
When a disc is playing,
press the PREV.[
] button to return to the
beginning of the track being played.
Additional presses of the PREV.[
button will move backwards through the
tracks on the disc.
)
PREV.(
REC
CD SYNC
DUBBING
SPEED
ERASE
FINALIZE
PLAYBACK
REC/PLAY
PLAY( )
)
When a disc is stopped,
you may press the NEXT[
PREV.[
that you wish to play. When the desired
track number appears at the left side of the
appropriate Information Display, press the
PLAY[ ] button to hear that track.
Dual-play Mode
Since the unit has more than one CD deck,
]
you may play a disc in either drawer. When
only one deck is playing, the unit is in the
Single mode.
In the Single mode, the audio output will be
fed to all digital and analog jacks for both
decks. This means you may select the input
on your receiver, preamp or processor for
either deck. For example, if you have the
Play Deck conncted to "CD" and the Record
Deck connected to "TAPE," when only one
deck is playing, either input may be
selected.
It is also possible to play two discs at once,
using the Dual mode. To initiate dual-mode
playback, press the DUAL button on the
front panel or remote. When the DUAL-Play
Indicator is lit, you may play a different disc
in both decks at the same time. The output
of each deck will be sent to the its
appropriate output jacks, and you will need
to select the deck you wish to listen to using
]
the input selectors on your receiver, preamp
or processor. You may also use the output
of one deck to feed your main-room system,
while the second deck is used to feed a
remote room.
As long as the DUAL-Play Indicator is lit,
]
each deck functions as a separate CD
player, and will respond to its own set of
controls on the front panel for either the Play
Deck or Record Deck.
To control the transports using the remote,
remember to first press the Selector button
NEXT(
)
)
REC LEVEL
PREV.
NEXT
INPUT
DISPLAY
5
6
4
7
PLAY
PAUSE
STOP
OPEN/CLOSE
3
8
2
9
1
10
ADR 620 AUDIO CD RECORDER
STOP( )
] or
] button to locate a specific track
- 17 -
DISPLAY
SEARCH(
)
SERCH
SEARCH
backward
DUAL
RANDOM
DUAL
PLAY/
SELECT
PREV.(
)
PREV.
NEXT
PAUSE
STOP
PROG.
CDP
CDP
CDR
PROG.
CHECK
REPEAT
REPEAT
CLEAR
A-B
REC
FINALIZE ERASE
DUBBING SPEED CD SYNC.
INPUT AUTO/MANU. TR INCR.
CDP
OPEN/CLOSE
CDR
for either the Play/CDP Deck or the
Record/CDR Deck, and then press the
desired command function.
NOTE : When in the Dual mode, you may
return to Single play mode by pressing the
DUAL button on the remote or the DUAL
button on the front panel. However, pressing
the DUAL button while both decks are
playing, will automatically stop playback of
the disc in the Record Deck while the disc
in the Play Deck continues to play. The
output of the play deck will be sent to both
sets of output jacks.
Dual-Deck Operation
Since the unit has two separate CD decks, it
may be used to function as two-disc
changer, so that you can continually play
two discs.
When the unit is in the Single-Play mode, as
shown by the DUAL-Play Indicator NOT
being lit, when the disc in one deck has
played through to the end, the disc in the
other deck will automatically begin to play.
Each disc will play through, and when one
deck is finished the other will start. To stop
playback, press the STOP[ ] button for the
deck that is currently playing.
To have the unit function as a standard CD
player, where the deck in use stops at the
end of a disc, press the DUAL button until
the DUAL-Play Indicator lights. In the Dual
mode, each deck acts independently of the
other and when the disc in one deck
finishes, it stops unless one of the Repeat
functions has been activated.
SEARCH(
)
forward
PLAY(
)
NEXT(
)
CDR
Advertisement
Table of Contents
