Table of Contents
Advertisement
3.1.2
Basic lifting guide
Refer to below guide for lifting and carrying the Battery Control Unit and Battery Modules
during installation.
Handling position
Handling position
Handling position
Handling position
Handling position
Battery Module
Battery Control Unit
Batter
Battery Control Unit
Battery Control Unit
(1 installer)
Battery Module
Battery Control Unit
(1 installer)
3.1.3
Unboxing the Package
Battery Module
Battery Control Unit
(1 installer)
Battery Module
Battery Module
Battery Module
(1 installer)
(2 installer)
(1 installer)
(2 installer)
(2 installer)
Battery Module
(2 installer)
Battery Module
(2 installer)
1. Cut the packing strap and remove
the top lid.
2. Remove the sleeve.
3. Pull out the Battery Control Unit. and
the Spacers (x2).
4. Pull out the bundled items, including
the Module Connecting Plate.
CAUTION
According to regional regulations, several people may be required for moving equipment.
3.1.4
Installation Location
Requirements:
• There must be no highly flammable or explosive materials nearby.
• The ambient temperature should be within the range of -4°F to 122°F (-20°C to
50°C).
• The battery pack must be installed on level ground that can support its weight.
• Product shall be installed indoors (ex. in a basement or a garage) or outdoors
under an eave and out of direct sunlight.
Recommendations:
• The building should be designed to withstand earthquakes.
• The area should be waterproof and properly ventilated. (IP55)
• The product should be installed out of reach of children and animals.
CAUTION
If the ambient temperature is outside operating range, the battery pack will stop
operating to protect itself. The optimal temperature range for the battery pack to operate
is from 59℉ to 86℉(15℃ to 30℃).
Frequent exposure to harsh temperatures may deteriorate the performance and life of the
battery pack.
5. Pull out Battery Module B.
6. Pull out Battery Module A.
7. (Optional) Pull out the parts for wall
mounting.
6
Advertisement
Table of Contents
