Philips EasyKey 7100 User Manual page 9

Tighten the 4 anchor screws in
3
the mortise.
Pass the cable through the cable
5
hole above the door. Align the
mechanical key tailpiece and the
square shaft with the 2 rotary
holes, and mount them into
the holes, so that the outside
escutcheon is closely fit in the
door surface from outside.
Install the
4
tube on the outside escutcheon
and cut the mechanical key slide
tailpiece to a suitable length.
Put the compressed spring and
the square shaft in turn into the
handle hole.
Attention
Appropriate cutting
mechanical key slide tailpiece, square shaft,
connecting screw tube, and anchor screw tubes
as per the door thickness.
Attach the
6
tightly to the inside of the door
and fasten the 2 anchor screws.
connecting screw
the length of the
mounting plate
7