How To Apply An; How To Replace Batteries - Philips EasyKey 7100 User Manual

How to apply an emergency power
Emergency
power interface

How to replace batteries

When the battery voltage is insufficient, and the
door cannot be opened from the outside, you can
power the lock through the Micro USB interface
by using a 5V power bank as an emergency power
supply. After opening the door lock, please replace
the batteries immediately.
The lock is powered by four 1.5V alkaline batteries.
There are two sets of working power inside the
battery cabinet. Eight batteries can be put in
to extend the battery life and reduce battery
replacement frequency.
The battery cabinet is located at the upper end
of the inside escutcheon. By pushing the battery
cover upwards, you can remove the battery cover
and then the batteries.
23