1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Monitor
  5. SIREMOBIL
  6. Installation instructions manual

Siemens SIREMOBIL Installation Instructions Manual

Hide thumbs Also See for SIREMOBIL:
Table of Contents

Advertisement

Quick Links

Download this manual
SIREMOBIL
System Manual
Installation Instructions
Installation of TFT displays
Print No.: SPR2-230.812.02.02.02
Replaces: SPR2-230.812.02.01.02
SP
© Siemens AG 2004
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model
_or_ design,_are_
reserved.
English
Doc. Gen. Date: 02.06

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIREMOBIL

Summary of Contents for Siemens SIREMOBIL

  • Page 1 SIREMOBIL System Manual Installation Instructions Installation of TFT displays © Siemens AG 2004 The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent...
  • Page 2 Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho- rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service procedures.

  • Page 3: Table Of Contents

    Concluding work........3 - 1 4 _______Changes to previous version _____________________________________ 4 - 1 Siemens AG SPR2-230.812.02...
  • Page 4 0 - 4 Contents Page SIREMOBIL SPR2-230.812.02 Page 4 of 4 Siemens AG System Manual Rev. 02 02.06 CS PS SP Medical Solutions...

  • Page 5: Safety Instructions

    NOTICE used without the safety alert icon indicates a possible danger that if disregarded may or will lead to an undesirable result or state other than death, physical injury or property dam- age. Siemens AG SPR2-230.812.02 Page 1 of 2 SIREMOBIL Medical Solutions Rev.

  • Page 6: Validity Of These Instructions

    These instructions are valid for upgrading a TFT support arm and 2 TFT displays on existing SIREMOBIL Compact, SIREMOBIL Compact L, SIREMOBIL Iso-C, ARCOSKOP and POWERMOBIL systems with available tube moni- tors, installed on the monitor trolley 37 77 880.

  • Page 7: Dismantling The Existing Monitors

    • In each case loosen the 2 screws at the monitor mounting (Fig. 4). • Lift down both monitors. • Reattach all previously removed parts to the monitor. Siemens AG SPR2-230.812.02 Page 1 of 8 SIREMOBIL Medical Solutions Rev. 02 02.06...
  • Page 8 Lift off the central blind cover and close one of the cable bushes on the side with it (Fig. 6). • Close off the 2nd cable bush on the side and the 8 fastening holes around the cable bushes on the sides with the enclosed blind covers. SIREMOBIL SPR2-230.812.02 Page 2 of 8 Siemens AG System Manual Rev.

  • Page 9: Installation Of The Video And Power Line Cables In The Monitor Trolley

    Starting with the logbook compartment, tighten the screws of the support arm base on the monitor trolley. Use 4 Allen screws M6 x 20, 4 lock washers and 4 plate washers for this (Fig. 8). Siemens AG SPR2-230.812.02 Page 3 of 8...

  • Page 10: Adjusting The Support Arm To The Size Of The Tft Display

    Setting the distances results in a distance of approx. 1 cm between the top and bottom edge of the TFT displays, on the one hand, and the tubes of the support arm, on the oth- er hand. SIREMOBIL SPR2-230.812.02 Page 4 of 8...

  • Page 11: Installation

    - Both tubes of the support arm should run in parallel to each other. Siemens AG SPR2-230.812.02 Page 5 of 8...

  • Page 12: Protective Ground Wiring Of The Support Arm

    2 - 6 Installation of TFT displays Fig. 13 Cabling of SIEMENS displays Fig. 14 Routing the cables Protective ground wiring of the support arm • On the support arm base of the TFT Display, a short protective ground wire is attached with stripped end.

  • Page 13: Wiring Of The Displays

    (Fig. 15). • Reattach the cover of the support arm (Fig. 15). • When present, switch on the power switches of the TFT displays. Siemens AG SPR2-230.812.02 Page 7 of 8 SIREMOBIL Medical Solutions Rev. 02 02.06...
  • Page 14 2 - 8 Installation of TFT displays This page is intentionally left blank. SIREMOBIL SPR2-230.812.02 Page 8 of 8 Siemens AG System Manual Rev. 02 02.06 CS PS SP Medical Solutions...

  • Page 15: Tft Display Barco Mvg 1318, Part Number 80 79 530

    Perform the protective ground wire test according to TD00-000.860.01. The protective ground wire resistance must not exceed 0.2 ohms. • Perform the IQ quick test of the system. • Perform the country-specific acceptance tests (part acceptance). Siemens AG SPR2-230.812.02 Page 1 of 2 SIREMOBIL Medical Solutions Rev. 02 02.06...
  • Page 16 3 - 2 Settings This page is intentionally left blank. SIREMOBIL SPR2-230.812.02 Page 2 of 2 Siemens AG System Manual Rev. 02 02.06 CS PS SP Medical Solutions...
  • Page 17 Changes to previous version 4 - 1 Editorial revised Descriptions for SIEMENS and other TFT displays deleted. Siemens AG SPR2-230.812.02 Page 1 of 2 SIREMOBIL Medical Solutions Rev. 02 02.06 CS PS SP System Manual...
  • Page 18 4 - 2 Changes to previous version This page intentionally left blank. SIREMOBIL SPR2-230.812.02 Page 2 of 2 Siemens AG System Manual Rev. 02 02.06 CS PS SP Medical Solutions...

Table of Contents