Simplink Connection; Activating And Using The Simplink Menus - LG 55LW9800 Owner's Manual

SIMPLINK Connection

Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. This TV may work with the devices that
support HDMI-CEC, but only devices with the
logo are fully supported.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
If the connected device does not support
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, you should use an
High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
SIMPLINK may not work properly if you a
third-party device that has an HDMI-CEC
function.
Activating and Using the
SIMPLINK menus
1
Press SIMPINK to access the SIMPLINK menus.
2
Press the Navigation buttons to select to On.
3
Press the Navigation buttons to scroll to one of
the devices and press ENTER.
No.
Displays the previously viewed TV channel.
Plays discs. When multiple discs are
available, the title of the disc appears at the
bottom of the screen.
Controls the connected VCR.
Description
No.
HDD recordings playback: Controls the
recording stored in HDD.
Audio out to home theater speaker or
Audio out to TV: Changes the audio output
between Home theater speaker and TV
speaker.
- A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
4
Control the selected AV device.
Function
Direct Play After connecting AV devices to
the TV, you can directly control
the devices and play media
without additional settings.
Select AV Enables you to select one of the
device AV devices connected to the TV.
Disc playback Control connected AV devices by
pressing the Navigation buttons,
ENTER,
Power off all When you power off the TV, all
devices connected devices are turned off.
Sync Power on When the equipment with
SIMPLINK function connected
HDMI terminal starts to play, the
TV will automatically turn on.
Switch audio- Offers an easy way to switch
out audioout.
If you change the input source by pressing
INPUT, the progressing function of the
SIMPLINK device will stop.
If you select a device that has the home
theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
If a connected SIMPLINK home theater
system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable.
Description
Description
, , , and .