EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product s
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
RS-232C on this TV is intended to be used
with third party RS-232C control hardware
and software. The instructions below are
provided to help with programming
software or to test functionality using
telenet software. RS-232C connection
cables are not supplied with the product.
Type of connector: D-Sub 9-
Pin Male
RS-232C IN
(CONTROL & SERVICE)
No.
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
Pin name