LG 55LW9800 Owner's Manual page 92

Setting
Shows clearer and distinctive yet natural edges of the video.
Edge Enhancer
This function works well over Sharpness UI 60 value.
xvYCC This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in Picture mode - Cinema, Expert when xvYCC signal is inputted through
HDMI.
Color Filter This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
This is the pattern used for expert adjustment.
Expert Pattern
This function is enabled in Picture Mode - Expert when you watch DTV.
Adjusts the overall color of the screen by changing the white baseline.
Color
Temperature
Color As the tool used by the experts to make adjustments by using the test patterns, this does not affect
Management other colors but can be used to selectively adjust the 6 color areas (Red/Green/ Blue/Cyan/Magenta/
System Yellow).
Color difference may not be distinctive even when you make the adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
» Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.
» Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.
» This feature is disable in RGB-PC and HDMI-PC mode.
a. Method: 2 Points
Pattern: Inner, Outer
Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 to
+50.
b. Method: 20 Point IRE
IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and
can be set among 0, 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue
according to each setting.
Red/Green/Blue: The adjustment range is -50 - +50.
c. Apply to all inputs
a. Gamma: Select 1.9, 2.2, 2.4
b. Method: 2 Points
Pattern: Inner, Outer
Red/Green/Blue Contrast, Red/Green/Blue Brightness
c. Method: 10 Point IRE
Pattern: Inner, Outer
IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and
can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each
setting.
Luminance: This function displays calculated luminance value for 2.2 gamma. You can
input luminance value you want at 100 IRE, than the target luminance value for 2.2
gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
Description